A shot of the adaptor and mount in the position they would be when the tranny is mounted. I originally began to lift the transmission into position with the adaptor mount installed but it only got in the way as I was aligning the pins and bolt holes on the bellhousing. Before you attach the adaptor in it's final position, check to see that the bolts holding it to the frame will go through the holes in the adaptor. I was getting frustrated trying to line things up to get the bolts to go through but they would stop just past the threads. I finally pulled the adaptor off and found out I needed to drill the holes bigger to get the bolts to go all the way through. Also, a friend who installed this adaptor said he had to loosen up his motor mounts to get it to slide up into the frame but mined lined up just right. Next –––>

Previous Page

Main C4 Page