Heater Collar Fabrication

The vendors want over $50 with shipping for a piece of rubber and wire that connects a 3" span and is hidden under the dash? Well it didn't seem like something that would be too difficult to fabricate, especially given the current one was not well built but still performed.

Total cost of this project was $12 and a trip to the plumbing store. I already had some glue and wire but you may need to buy some if you don't. Below are some photos and notes about the project. Take the Full Tour or click on the links below to view individual photos.



Pipe Coupler



Finished Collar

Top View

Seal Kit

Plenum Mod

Replace Wiring

Back to Home Page