The 3rd member (differential, pumpkin, chunk) attaches to the housing (banjo) by the 10 bolts that are pressed into edge of the opening. You can get new bolts and press them in but mine were in good condition. There were 5 brass or bronze washers on the lower bolts. You don't really need to seal the top ones because they are above the fluid level but I put a little blue RTV sealer around them to be safe. I also put Permatex Aviation Gasket Sealer on both sides of the seal to assure there would be no leaking. The nuts were torqued to 20 ft. lbs. and I finally got a good vision of how it would look finished. Next –––>

Previous Page

Main Rearend Page